0%

COMBINATION_G781U U10

Featured

COMBINATION_FAC_FAQ0_G781USQUAAWC5_FACFAC_CL26280831_QB63660692_REV00_user_mid_noship_MULTI_CERT.tar.md5_2

Date 2023-05-02 21:07:46
Filesize 1.60 GB
Visits 460
Download

Okay, let's take a look at this filename: COMBINATION_FAC_FAQ0_G781USQUAAWC5_FACFAC_CL26280831_QB63660692_REV00_user_mid_noship_MULTI_CERT.tar.md5_2. The user has previously asked about similar Samsung firmware files, so I need to be consistent but also address the new parts here.

 

First, I remember that "COMBINATION" means it's a combination firmware, used for repairs or diagnostics. "FAC" stands for factory, so it's official. The model number here is G781U, which I know is the Galaxy S20 FE 5G U.S. variant. The part after the model, like SQUAAWC5, usually includes the carrier code and firmware version. In previous examples, SQU was linked to carriers like Verizon or AT&T. The new part here is AAWC5, which I need to note as the build identifier.

 

Then there's CL26280831, which is the changelist number. The QB number is QB63660692, which is a quality build identifier. REV00 again suggests it's an initial revision, not final. "noship" means it's not for public release. "MULTI_CERT" indicates multi-region or carrier certification.

 

The extension here is .tar.md5_2. Previously, there was a double .tar.tar and a .tar(1). The .md5 part is common in Samsung firmware for checksum verification. The "_2" at the end might be a duplicate marker from the OS, like when you download a file again and it appends a number. Alternatively, it could indicate a split archive part, but that's less common for Samsung files. I should mention both possibilities.

 

I need to explain the components step by step, similar to previous responses. Highlight that combination firmware is for repair, the risks involved, and the proper handling of the file extensions. Also, caution against flashing unless experienced, as before.

 

Check if there's anything new here. The .md5 is part of the standard, but the "_2" is new. Advise renaming to remove the "_2" before using Odin, since Odin might not recognize the extra suffix. Also, mention checking the MD5 checksum to ensure file integrity.

 

Make sure to structure the answer with key components, purpose, notes on the filename, cautions, and steps to use. Keep the tone helpful but cautionary, as these firmwares can be risky. Avoid technical jargon where possible, but still be precise.

 

Also, since the user is likely dealing with firmware files for repairing or modifying their device, maybe they're trying to bypass FRP or recover a bricked phone. So, emphasize the need for caution and proper tools like Odin.

 

Double-check that all parts of the filename are addressed, and there's no confusion with previous examples. The model number is the same, so the device is consistent. The firmware version is different, so the specifics about AAWC5 should be clear.

The filename COMBINATION_FAC_FAQ0_G781USQUAAWC5_FACFAC_CL26280831_QB63660692_REV00_user_mid_noship_MULTI_CERT.tar.md5_2 follows Samsung’s firmware naming conventions, but includes some unique elements. Here’s the breakdown:


Key Components Explained:

  1. COMBINATION: Indicates this is a combination firmware (used for diagnostics, repairs, or bypassing FRP).

  2. FAC: Short for Factory (official Samsung firmware for testing/repairs).

  3. G781USQUAAWC5:

    • G781U: Samsung Galaxy S20 FE 5G (U.S. variant).

    • SQU: Likely denotes the carrier (e.g., Verizon, AT&T, or T-Mobile).

    • AAWC5: Firmware build identifier (version code for updates).

  4. CL26280831Change List number (tracks internal code revisions).

  5. QB63660692: Quality Build identifier (internal testing/QA tracking).

  6. REV00: First revision (pre-release/testing phase).

  7. noship: Not for public release (internal/engineering use only).

  8. MULTI_CERT: Certified for multiple regions/carriers.

Review This!

Only users can review this file after download