kyocera duraforce pro 2 E6910 .qcn FEATURED [ 2024-11-28 11:09:38 ]
Kyocera DuraForce E6560, E6710.qcn FEATURED [ 2024-11-28 11:08:04 ]
Kyocera DuraForce Pro E6833.qcn FEATURED [ 2024-11-28 11:04:46 ]
Kyocera DuraForce Pro E6833 backup work only jtaq FEATURED [ 2024-11-28 11:03:25 ]
Kyocera DuraForce Pro (E6820) QCN FEATURED [ 2024-11-17 15:38:21 ]
17.59%

Kyocera DuraForce Pro (E6820) QCN

Featured

Kyocera DuraForce Pro (E6820) qcn

Date 2024-11-17 15:38:21
Filesize 222.00 KB
Visits 53
Downloads 2
Download

EMMC Device Information :
EMMC CID: 90014A484247346132A44C5BE0A9345D
EMMC CSD: D02701328F5903FFFFFFFFE78A400017
Manufacturer: SKHYNIX , NAME: HBG4a2 , HEX: 484247346132 , S/N: 4C5BE0A9 , Rev: A4
Manufacturer ID: 90 , OEM ID: 4A , Device Type: BGA (Discrete embedded) , Date: 3/2017
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (0x000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (0x000000400000)
EMMC RPMB Capacity: 4096 KB (0x000000400000) , Counter: 20788 , Response: Clean
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x00 , Device not boot enabled
Boot Bus Config: 0x00 , x1 (sdr) or x4 (ddr) bus width in boot operation mode
H/W Reset Function [RST_N_FUNCTION]: 0x01 , RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Partition settings [PARTITION_SETTING_COMPLETED]: 0x00

Review This!

Only users can review this file after download