G950U_CRE2_Xposed_1.1 file download only gold member download
| Date | 2020-07-06 10:24:46 |
| Filesize | 3.00 GB |
| Visits | 557 |
| Downloads | 1 |
BL_SAFESTRAP_XXXXXXX）.tar
6.AP_Xposed_G950U_XXX.tar
3.CP_G950U_U2_RC5.tar
2.AP_G950U_U2_RC5.tar
7.CSC_AURORA.tar
1.BL_G950U_U2_RC5.tar
0.BL_ENG_G950U_U2.tar
XposedInstaller_3.1.5.apk
Before flashing, please confirm your US version S8/S8+ current Bootloader version:
current S8 supported version:
U1XXXX=Bootloader V1
U2XXXX or S2XXXX=Bootloader V2 (current Aurora version)
U3XXXX or S3XXXX=Bootloader V3
1, if your S8 BL The version is V1-V2, you can continue the flashing process below.
2. If the BL version is already V3 or higher than V3, this ROM will not be flashable.
Current S8+ supported versions:
U1XXXX=Bootloader V1
U2XXXX or S2XXXX=Bootloader V2
U3XXXX or S3XXXX=Bootloader V3 (current Aurora version)
U4XXXX or S4XXXX=Bootloader V4 (currently not yet officially released)
1. If your S8+ BL version is V1 -V3, you can continue the following flashing process.
2. If the BL version is already V4 or higher than V4, this ROM will not be flashable.
3. Please try not to brush the latest official bottom bag. After the update, you may not be able to use some methods to continue brushing.
The new feature code of Nougat 8.0 NOTE8 was originally produced by the Aurora team. If you have a reprinted friend, please say hello in advance and respect our labor.
Thank you for the brushing method provided by XDA Great God, you can check here for details:
forum.xda-developers.com/verizon-galaxy-s8+/development/rom-t3771206
[2.0 update log]
Please carefully check the following important information:
1. Some settings need to restart the phone to take effect.
2. The ROM does not contain any malicious software and system applications other than the official ones. Please check the MD5 value before downloading the ROM.
3. A small amount of promotional software has been added to the ROM. Support us. Please use the RE or Aurora settings to uninstall after a few days.
4. The post is visible as a reply by default. If you reply and download and flash the ROM package, it means that you agree to take the risk by default! Please choose carefully!
5. Note: Please keep the habit of backing up data before flashing to avoid data loss!
6. 8.0 ROM needs to wait for a long time after the first flashing, it is estimated to take 5-10 minutes, please be patient.
Thanks again to all the friends who invited us to drink beer.
If you want to invite me to have a cup of coffee or beer, please donate directly to the Alipay account mentioned in the Aurora settings. The donation is a great encouragement and affirmation to us. At the same time, please leave the forum ID or your name in Alipay .
[Precautions before flashing]
[Preparation before flashing]
[1] About operator selection
1. Before flashing, please confirm the current US version of the carrier: China Unicom uses XAS, and the mobile card uses ACG.
2. Choose operator method one. You can use the old ROOT mechanism to modify the operator using the following command line:
3. Choose operator method two. You can use the official engineering integrated package corresponding to the Bootloader version. After booting, flash into the CSC part of the current base package. Next, open FactoryIME and use the engineering instruction: *#243203855# to select the desired one. For the carrier
, select the Full*** option and restart.
[2] After the operator chooses to complete, please brush the official 5-piece set once (please ignore Userdata). After the official package is turned on, the following brushing process can be started.
[Flashing process]
1. Long press BIX + volume down + power button to enter the Odin interface.
(1) Click the BL button and select 0.BL_ENG_***.tar .
(2) Click Start to start brushing in.
(3) When the flashing is about to be completed, please be ready to long press BIX+Volume Down+Power button to enter Odin again.
(4) According to the operation of step (3), re-enter the Odin interface.
2. Click RESET on the ODIN interface to clear all options.
(1) Click the PIT tab and click the PIT button to select the PIT file of the current model ( ***_USA_SINGLE.pit )
(2) Options tab page, please check ( Check) the following options: Auto Reboot, Nand Erase, Re-Partitions, F. Reset Time.
(3) Click the AP button and select 6.AP_AURORA_***.tar (please note that Telecom Unicom chooses XAS and mobile chooses ACG) .
(4) Click Start to start brushing in.
(5) When the flashing is about to be completed, please be prepared to long press BIX+Volume Down+Power button to enter Odin again.
(6) After the flashing is completed, Odin will display a red failure, please ignore it.
(7) According to the operation of step (5), re-enter the Odin interface.
(8) After restarting to enter the Odin interface, a prompt such as flashing failure will be displayed on the screen, please ignore it and continue to the next step.
3. Click Reset on the Odin interface to clear all options (if you want to save some trouble or have abnormal conditions, please directly close ODIN and reopen it) .
(1) Click the BL button and select 1.BL_****.tar .
(2) Click the AP button and select 2.AP_****.tar .
(3) Click the CP button and select 3.CP_****.tar .
(4) Click Start to start brushing in.
(5) When you finish the flashing, please be ready to press and hold the BIX + volume up + power button, ready to enter Recovery.
(6) According to the operation of step (5), enter the official Recovery interface.
4. The official Recovery interface will display a blue interface and display Error after a few seconds, and then repeatedly restart with a black screen.
(1) Long press BIX+Volume Down+Power button, you may have to wait for some time before entering Odin.
(2) According to the operation of step (1), re-enter the Odin interface.
5. Click Reset on the Odin interface to clear all options.
(1) Click the BL button and select0.BL_ENG_***.tar .
(2) Click Start to start brushing in.
(3) When the flashing is about to be completed, please be ready to long press BIX+Volume Down+Power button to enter Odin again.
(4) According to the operation of step (3), re-enter the Odin interface.
6. Click Reset on the Odin interface to clear all options.
(1) Click the CSC button and select 7.CSC_AURORA.tar .
(2) Click Start to start brushing in.
(3) When the flashing is about to be completed, please be ready to long press BIX+Volume Down+Power button to enter Odin again.
(4) After the flashing is completed, Odin will display a red failure, please ignore it.
(5) According to the operation of step (3), re-enter the Odin interface.
(6) After restarting to enter the Odin interface, a prompt such as flashing failure will be displayed on the screen, please ignore it and continue to the next step.
7. Click Reset on the Odin interface to clear all options.
(1) Click the BL button and select 1.BL_****.tar .
(2) Click Start to start brushing in.
(3) After the flashing is completed, the phone will automatically restart.
8. After the phone restarts, it will automatically enter the official Recovery, showing Erasing, and restart automatically after tens of seconds.
9. Brushing is completed.
10. If there is a miss or mistake during the above flashing process, please try to press and hold the volume + power to restart the phone and try the next step, if not, please start again.
11. Please pay attention to the bold file name above, please do not choose the wrong file.
[About Telecom 4G]
Telecom 4G needs to be cracked again independently. Telecom card users can continue to use *#0808# fingerprint to enter the engineering mode to crack after finishing this ROM. After brushing this ROM, the factory restore 4G will not disappear, please refer to the specific Related posts, network disk sharing already contains the relevant files needed by XAS to crack the telecommunications 4G.
[Frequently Asked Questions]
1. Quickly enable (double-click) the camera in the original settings of the camera is gone?
Please redefine the function of double-clicking the power button in the custom button function of Aurora Settings Enhanced Settings.
Brush Bowen member information:
File name: AURORA_G955U_RD4_U3.rar
File Size: 4,074,878,162 bytes (3.80 GB)
the MD5: c1349fc53fe96b0ba3af3e00aa5ad007
SHAl: a02858043f0713c9a3ddf74b2f6bd06bcc705b71
SHA256: 98f677757175b51890eaf5103d4e7f2af9cb1e019c69451d330fb2b1a119601a
CRC32: 13c9871b
file name: AURORA_G950U_RC5_U2.rar
file size: 4073666504 bytes (3.79 GB)
Updated: 2018-05-27 15:10
MD5: 31ac825e08d95d27f7482b2d9ed16a23
SHA1: a511f3285eb9f701ba85a53664f6558758686640
SHA256: 7bf169872ae7ee6181ecb29d838bbf3f3417ba609f0e28b19fb41047b6fd34fc
CRC32: 3dc46db0
