How to use HQXA CustomerDL EMMC Tool

Quick guide explaining how to use HQXA Trassion EMMC Tool

1. Install DRIVER
2. Connect phone while in edl mode
3. Run the flash tool by double clicking 'ets.startrun.exe'
4. Input the username and password if the tool requires one
   
   Code:

   username: Power
password:  leave_blank
Test Sel:    Customer -EMMC Download
5. Click "SET" > Change Path & assign path of firmware.
6. Click "USB" then select Qualcomm 9008 port
7. Click SET again and under port setting > select Port No.
8. Click "Start All" to start flashing