Z-FOLD2 F916X_865P_12.0_VC5_V6.0_P1 Android 12 COSTOM ROM

● Supported models:
● F9160 (National Bank/Hong Kong version/Taiwan version FOLD2)
● F916N (Korean version FOLD2)
● F916U (US version FOLD2)
● F916B (European version FOLD2)

● Written in front:
1. Possible problems after flashing: reduced security, loss of warranty, KNOX physical fuse, inability to use Samsung PAY, inability to support Alipay fingerprints, inability to connect to Samsung watches, etc.
2. After flashing, a red letter and exclamation mark will be displayed when turning on the phone (Orion can currently fix this problem).
3. The ROM does not contain any malicious programs and has been detected by Kabas, 360 Security Guard, etc.
4. The author only simplifies the official ROM and adds some enhanced functions. It will be released after flash testing before release and there will be no obvious BUG.
5. Flashing is a voluntary act, and the author is not responsible for any problems caused by flashing this ROM.
6. If there are any bugs, please provide rational feedback and the author will try his best to fix it.
7. 

● Notes:
1. The ROM is a card flash package. Please flash TWRP first and then flash the phone. TWRP can be obtained from the flash tool.
2. Before flashing this ROM, please use ODIN to flash the official 3.0 base package 4-piece set before flashing.
2. If the built-in card is found to be garbled when flashing (cannot copy files to the phone through MTP), it means that the built-in card has not been formatted. Please format it first and then operate. If it is found during flashing that set_metadata_recursive: Error on lstat of "/data/ **"The error with error number 7 also means that the built-in card has not been formatted. Please format it first and then operate.
3. If you find assert failed: update_dynamic_partitions(*) error number 7 during the flashing process, it means that you may have flashed other unofficial partition files before. Please flash the official base package before continuing.

[6.0 update log]
1. Made based on F9160 official latest Android 12.0(S) base package F9160ZCU3GVC5(4.1).
2. This version has official changes. Before flashing, please make sure that the machine has been flashed with the latest Android 12.0 base package to avoid problems such as being unable to boot (you can download or use the tool yourself in another article).
3. Please use the latest version of TWRP Recovery (3.6.1.11) to flash your phone.
4. Magisk version is updated to 24306 (Alpha).
5. All Magisk components are updated to the latest version and use Zygisk mode by default (you need to open Zygisk in Magisk first and restart).
6. The secure folder works normally.
7. Repair Samsung Health so that it can be used normally.
8. Repair S mutual transmission so that it can be used normally.
9. Re-add KeysCafe keyboard special effects display to Android 12 keyboard (click here to download the latest version of KeysCafe and Theme Park, it will take effect after opening). 10. Hide MAGISK function with one click ( Settings->System Enhancement), which can bypass some APP detection. 11. The flash package is divided into two parts. First flash P1 and then directly flash P2 without restarting.

Preparations before flashing
1. Install the mobile phone driver first before proceeding to the following steps.
2. Make sure the OEM unlocking option in the developer options is turned on.
3. Confirm that BootLoader (BL for short) is in the unlocked state.
4. Confirm that the RMM or KG lock on the phone has been unlocked.
5. Please log out of the Samsung account or GOOGLE account that you have logged into on your phone first.

First-time flashing process:
1. As long as you are starting from the official package status, you must follow this process to flash your phone.
2. Open the OEM option in the developer options.
3. Unlock the Bootloader (BL) lock. For details, please refer to the relevant tutorials or ferry it yourself.
4. Unlock the KG lock. For details, please refer to relevant tutorials or ferry by yourself.
5. Download the corresponding model of TWRP Recovery from the flash tool sharing.
6. After the data cable is connected to the computer, restart the computer and long press the volume up + volume down keys to enter ODIN mode. Use ODIN to flash TWRP_Recovery. When restarting, please press and hold the power key + volume up keys immediately and do not let go until it is completely Enter TWRP Recovery.
7. If prompted to encrypt the DATA partition after entering TWRP Recovery, please slide the slider directly.
8. Decrypt the DATA partition (this operation will cause all data on the phone's built-in storage to be lost!): Click Clear -> Format Data Partition -> Enter "yes" to confirm.
9. Through any of the following methods (choose according to the actual situation):

(1)、将下载的ZIP刷机包和MD5文件通过我的电脑复制到手机上。
(2)、将ZIP和MD5文件复制到SD卡后插入手机来刷机。
(3)、将ZIP包复制到U盘，然后OTG接入手机（如果可以的话）。
(4)、电脑上通过ADB命令将刷机文件推送至手机内置存储（与复制效果相同），命令行为：adb push xxxxx.zip/sdcard。
10. Click Install, then select the previously downloaded ROMZIP file (if it is an SD card or OTG USB flash drive, please select the storage location manually first), and then slide the slider to the right to start the flashing process.
11. After the flashing is completed, if there are other patch ZIPs, you can continue to flash them. If there are none, just click restart.
12. Click Restart-System to restart the phone.
13. The first boot time after clearing data takes 5-10 minutes, please wait patiently.

General flashing process:
1. Please confirm that TWRP or other third-party RECOVERY has been flashed on the machine.
2. Download the ROM and required patch files and put them on the built-in card or SD card.
3. Press and hold the power + volume up keys at the same time when turning on the phone, and do not release it until you enter TWRP Recovery.
4. Click the Clear button on the main interface of TWRP Recovery, and then slide the slider at the bottom directly (if necessary, you can customize the partition to be cleared, please operate with caution).
5. Press the return key to return to the main interface and click the install button. Click the storage location above to select the location where you will save the ROM. If it is an external card, please select SD card ( MB), click OK, then select Aurora_ .zip, and then slide the slider below to flash it. After completion, if If there is any engine oil that needs to be patched, you can directly press the return key here to flash the required patch file again.
6. Restart the machine.
7. The first boot time after clearing data takes 5-10 minutes, please wait patiently.